Agilent Technologies N1996A-503 User Reference page 188

Mode
One Port Insertion Loss Measurement
Meas Setup
Meas Setup
accesses a menu of keys to set up the Return Loss measurement. This section
describes the menu keys available with
turn on the measurement, select
Mode
Key Path
Avg Mode
Sets the type of termination control used for the averaging function. This determines the
type of averaging that will be used for the specified number of measurements.
Mode
Preset
Range
Key Path
Off Turns averaging functions off.
Key Path:
Exponential Sets the averaging function to exponential. With exponential averaging mode,
each successive data acquisition is exponentially weighted and combined with the existing
average. This weights new data more than the old data, which facilitates tracking of slow
changing signals.
Key Path:
Max Hold In
Max Hold
the analyzer maintains and displays a max hold trace, which
represents the maximum data value on a point-by-point basis of the new trace data and
188
One Port Insertion Loss
Meas, One Port Insertion Loss
Stimulus / Response
Front-panel key
Stimulus / Response
Repeat, ON
Off | Exponential | Repeat | Repeat Max Hold
Meas Setup, Avg Mode
Meas setup, Avg Mode, Off
Meas setup, Avg Mode, Exponential
measurement selected. To
.
Chapter 3