Agilent Technologies N1996A-503 User Reference page 352

IEEE and STATus Commands (Remote Commands Only)
Agilent CSA STATus Register Model
Agilent CSA STATus Register Model
The hierarchy of the status registers is shown in
Preset the Status Byte
Sets bits in most of the enable and transition registers to their default state. It presets all
the Transition Filters, Enable Registers, and the Error/Event Queue Enable. It has no
effect on Event Registers, Error/Event QUEue, IEEE 488.2 ESE, and SRE Registers as
described in IEEE Standard 488.2–1992, IEEE Standard Codes, Formats, Protocols and
Common Commands for Use with ANSI/IEEE Std 488.1–1987. New York, NY, 1992.
Mode
Remote Command
Example
Status Questionable Register
Questionable Condition
This query returns the decimal value of the sum of the bits in the Questionable Condition
register.
NOTE
The data in this register is continuously updated and reflects the
current conditions.
Mode
Remote Command
Example
Preset
SCPI Status Bits/OPC
Dependencies
Questionable Enable
This command determines which bits in the Questionable Event register will set the
352
Figure 6-2 on page
All modes
:STATus:PRESet
STAT:PRES
All modes
:STATus:QUEStionable:CONDition?
STAT:QUES:COND?
0
Sequential command
333.
Chapter 7