Mode
Occupied Bandwidth Measurement
Avg Number
Sets the average count number (the number of sweeps) used with measurement averaging.
Mode
Remote Command
Example
Preset
Min
Max
Key Path
Avg Type
Accesses averaging settings that determine how the signal will be measured. You can set
the measurement to logarithmic (video) scaling, or power (RMS) scaling.
Mode
Remote Command
Example
Preset
Preset
State Saved
Range
Key Path
Log-Pwr Avg (Video) Sets the logarithmic (decibel) scale for all filtering and averaging
processes. This scale is also referred to as "Video" because it is the most common display
and analysis scale for the video signal within a spectrum analyzer.
Example
108
SA
[:SENSe]:OBWidth:AVERage:COUNt <integer>
[:SENSe]:OBWidth:AVERage:COUNt?
AVER:OBW:COUN 50
100
1
4096
Meas Setup, Avg Number
SA
[:SENSe]:OBWidth:AVERage:TYPE RMS|LOG
[:SENSe]:OBWidth:AVERage:TYPE?
AVER:OBW:TYPE RMS
LOG
Log-Pwr Avg (Video)
Saved in instrument state.
Log-Pwr Avg (Video) | Pwr Avg (RMS)
Meas Setup, Avg Type
AVER:OBW:TYPE LOG
Chapter 3