Agilent Technologies N1996A-503 User Reference page 157

Preset
State Saved
Range
Key Path
Control/Sweep
Accesses the sweep and measurement control settings that can be changed when using the
Two Port Insertion Loss measurement.
Mode
Key Path
Restart, Single, Cont
The control sweep functionality is shared across all the Modes. See
page 252 of the "Utility and Control/Sweep Functions" section for details about how they
operate.
FREQ/Channel
FREQ/Channel
The following
measurement. The measurement must already be running to access these keys. Press
Meas Two Port Insertion Loss
,
Mode
Key Path
Start Freq
Use this key to specify the Start Frequency of your frequency range.
Mode
Remote Command
Chapter 3
10.00 dB
Saved in State
1.0 to 20
AMPTD Y Scale, Scale/Div
SR
Front-panel key
keys are for setting up a Two Port Insertion Loss
to turn on the measurement.
SR
Front-panel key
Stimulus / Response
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Two Port Insertion Loss Measurement
"Control/Sweep" on
Mode
157