Calculate:marker[1]|2|3|4:X:readout Frequency|Time|Itime|Period; Calculate:marker[1]|2|3|4:X:readout - Agilent Technologies N1996A-503 User Reference

Remote Command
SCPI Example
Remote Command Notes
Preset/Default
State Saved
Range
Key Path
Frequency Sets the Marker Readout (Marker X Axis scale) to Frequency, displaying the
absolute frequency of a normal marker or the frequency of the delta marker relative to the
reference marker.
Mode
Remote Command
SCPI Example
Dependencies /
Couplings
Key Path
Period Sets the Marker Readout (Marker X Axis scale) to Period, displaying the reciprocal
of the frequency of the marker, or the reciprocal of the frequency separation of the two
markers in a delta-marker mode. In non-zero span, this is 1/frequency. The units are those
of time (s, ms, etc.).
Mode
Chapter 3

:CALCulate:MARKer[1]|2|3|4:X:READout

FREQuency|TIME|ITIMe|PERiod
:CALCulate:MARKer[1]|2|3|4:X:READout?
CALC:MARK3:X 1GHz activates the Marker3 and positions it
on the trace at 1GHz.
This feature is only available for the SA measurement in
Spectrum Analyzer Mode.
In Time Domain, only "Time" & "Inverse Time" are valid as
parameters. "Frequency" & "Period" softkey are grayed out.
"Inverse Time" is grayed out as well if the Marker Mode is not
set to Delta.
"Inverse Time" is not a valid parameter in Frequency Domain,
so the associated softkey is always grayed out.
Depending on the Trace Domain. If domain is Frequency,
default is Frequency; if Domain is Time, default is Time.
Yes
Frequency | Period | Time | Inverse Time
Marker, Marker Readout
Spectrum Analyzer with Meas OFF
See details in "Marker Readout (Marker X Axis Scale Type)"
Table described above
CALC:MARK2:X:READ FREQ sets marker 2 with a Marker
Readout type (Marker X Axis scale) to Frequency.
Only available when x axis scale is frequency.
Marker, Marker Readout, Frequency
Spectrum Analyzer
Meas Off (Spectrum Analyzer) Measurement
Mode
49