Marker ->
Accesses the marker function menu keys that change value of center frequency or
reference level to the current value of the selected marker.
Mode
Key Path
Mkr -> RL
Sets the reference level to the amplitude of the specified marker. In delta marker mode,
the reference level is set to the amplitude difference between the markers. (For example, if
the difference is –15 dB, the reference level will bet set to –15 dBm.)
Mode
Remote Command
Example
Key Path
Meas
In the Stimulus Response mode,
Stimulus Response mode. The measurement runs using the current default setup. Or you
can change settings for your unique measurement requirements. Settings can be changed
using the functions available under the
Mode:
Key Path
Meas Setup
In the Two Port Insertion Loss measurement,
associated with this measurement.
Chapter 3
SR
Front-panel key
SR
:CALCulate:TPILoss:MARKer[1]|2[:SET]:RLEVel
CALC:TPIL:MARK2:SET:RLEV
Marker ->, Mkr -> RL
Meas
accesses a menu of keys associated with the
Meas Setup
key.
All
Front-panel key
Meas Setup
Two Port Insertion Loss Measurement
accesses a menu of keys
Mode
163