View/Display - Agilent Technologies N1996A-503 User Reference

Mode
Occupied Bandwidth Measurement
Remote Command Notes
Preset
State Saved
Range
Key Path

View/Display

The display functionality is shared across all the measurements in the Spectrum Analyzer
Modes. For details about how it operates, see
page 87.
Mode
Key Path
124
The query returns a name that corresponds to the detector type
as shown below, and indicates the setting for the specified trace.
The RMS selection is identical to AVERage. If RMS has been
selected, the query will return the "AVER" string.
String Returned Definition
AVER Average/RMS
POS Positive peak
SAMP Sample
NEG Negative peak
Preset returns all traces to "auto" detector.
The type of detection used depends on the trace type. Since the
preset trace type is Clear/Write, the auto detector is "Sample".
Saved in State
Peak | Sample | Negative Peak | Average (RMS)
Trace/Detector, Detector Function
"View/Display (Spectrum Analyzer Mode)" on
SA
Front-panel key
Chapter 3