Agilent Technologies N1996A-503 User Reference page 181

Remote Command
Example
Dependencies / Couplings
Remote Command Notes
Preset
State Saved
Key Path
View/Display
View/Display
The following
The measurement must already be running to access these keys. Press
Insertion Loss
to turn on the measurement.
Mode:
Key Path
Avg Insertion Loss
Sets the Average Insertion Loss setting to either On or Off.
Mode
Preset
Range
Key Path
Chapter 3
:TRACe[1]|2:TPILoss:DISPlay[:STATe] ON|OFF|1|0
:TRACe[1]|2:TPILoss:DISPlay[:STATe]?
TRAC2:TPIL:DISP 1 Makes trace 2 visible
TRAC2:TPIL:DISP 0 Blanks trace 2
• Setting the trace type (even to the type it was already in)
puts the trace in
• Loading a trace from a file puts that trace in
regardless of the state it was in when it was saved.
Display On = Show, Display Off = Blank
Show Blank
for Trace 1;
saved in Instrument State
Trace/Detector, Display Show/Blank
keys are for setting up a Two Port Insertion Loss measurement.
All
Front-panel key
Stimulus / Response
On
On | Off
View/Trace, Avg Insertion Loss
Two Port Insertion Loss Measurement
Show
for 2
Meas
Mode
Show
Two Port
,
181