Agilent Technologies N1996A-503 User Reference page 139

List: Select the ACP format from a list of values that are set automatically—independent
of the channel standard.
Cust (Custom): Manually set all parameters: the measurement bandwidth and
measurement time for the center and adjacent channel(s), the offset from the center
channel for the first adjacent channel, and the offset between adjacent channels.
The option you select determines which menu keys are active. If you select Chan or List,
Channel BW/Time/Freq Err is available, but all menu keys on the next level are
unavailable and grayed out, enabling you only to view the settings. To change any of the
settings, you must choose Cust.
Mode
Preset
Range
Key Path
Chan Std (Radio Std) Opens a table with a list of available channel standards such as North
American Cellular CDMA, North American PCS CDMA, and Japan CDMA. The current
standard is highlighted. This enables you to select one of the available channel (radio)
standards. You must use the up and down arrow navigation keys to select the standard you
want and then use the
Cancel
key.
Mode
Dependencies /
Couplings
Key Path
Select Sets the selected channel (radio) standard as the standard for the measurement. The
different Channel Standards available are:
North American Cellular CDMA | North American PCS CDMA | Japan CDMA | Korean PCS
CDMA | Secondary 800 CDMA | IMT–2000 cdma2000 | GSM–850 | GSM–900 | EGSM–900 |
GSM DCS–1800 | GSM PCS–1900 | North American Cellular TDMA | North American PCS
TDMA | iDEN–800 | iDEN–900 | North American Cellular AMPS | NMT–450 | UARFCN UMTS
| UARFCN Band B UMTS | RGSM–900 | GSM–450 | GSM–480
Mode
Key Path
Chapter 3
Channel Analyzer
Chan
Chan | List | Cust
Meas Setup, Format/BW, Format Type
Select
key to set the standard. To abort your selection, use the
Channel Analyzer
Format Type must be set to Chan
Meas Setup, Format/BW, Chan Std (Radio Std)
Channel Analyzer
Meas Setup, Format/BW, Chan Std (Radio Std), Select
Adjacent Channel Power—ACP (I&M) Measurement
Mode
139