Meas; Meas Setup - Agilent Technologies N1996A-503 User Reference

Meas

Meas
The key displays a menu that lets you make one-button measurements such as the
occupied bandwidth measurement. In the Spectrum Analyzer mode (see
Analyzer" on page 28), Measurements Off is the default measurement. You must select
Occupied BW. The measurement runs using the current default setup. Or you can change
settings for your unique measurement requirements.
Settings can be changed for these measurements using the functions under the Meas
Setup key (see "Meas Setup" on page
Mode:
Key Path

Meas Setup

In the Spectrum Analyzer mode,
current measurement. To access the following keys for setting up an Occupied BW
measurement, you must have that measurement selected. Press
select the measurement.
Mode:
Key Path
Avg Mode
Averaging functions are the same as defined in the Spectrum Analyzer measurement, but
the parameter values are measurement dependent. Therefore, the remote commands are
different.
Sets the type of termination control used for the averaging function. This determines the
averaging action after the specified number of measurements (see
reached.
Mode
Remote Command
Example
Chapter 3
105).
All
Front-panel key
Meas Setup
accesses a menu of keys associated with the
SA
Front-panel key
SA
[:SENSe]:OBWidth:AVERage:TCONtrol
EXPonential|REPeat|RMAXhold
[:SENSe]:OBWidth:AVERage:TCONtrol?
AVER:OBW:TCON REP
Occupied Bandwidth Measurement
"Spectrum
Meas Occupied BW
, to
Avg Number
) has been
Mode
105