Unit:obwidth:power Dbm|Dbmv|Dbuv|V|W|A; Unit:obwidth:power - Agilent Technologies N1996A-503 User Reference

selected, the vertical divisions are scaled in logarithmic units.
vertical divisions linearly, and sets the default amplitude units to volts.
Mode
Remote Command
Example
Preset
State Saved
Range
Key Path
Y Axis Units
Displays the menu keys that enable you to change the vertical (Y) axis amplitude unit. The
analyzer retains the entered Y Axis Units separately for both Log and Lin amplitude scale
Scale Type
types. For example, if
Scale Type (log)
pressing
Y Axis Units
you set to V, pressing
Type (Log)
again sets the Y Axis Units back to dBm.
Mode
Remote Command
Example
Preset
Range
Key Path
dBm Sets the amplitude unit for the selected amplitude scale (log/lin) to dBm.
Example
Key Path
Chapter 3
SA
:DISPlay:OBWidth:WINDow:TRACe:Y[:SCALe]:SPACing
LINear|LOGarithmic
:DISPlay:OBWidth:WINDow:TRACe:Y[:SCALe]:SPACing?
DISP:OBW:WIND:TRAC:Y:PDIV LIN
Log
Saved in State
Log | Lin
AMPTD Y Scale, Scale Type
has been set to Log, and you set
Y Axis Units
sets the to dBm. If
Scale Type (Lin)
SA

:UNIT:OBWidth:POWer DBM|DBMV|DBUV|V|W|A

:UNIT:OBWidth:POWer?

UNIT:OBW:POW DBMV
Scale Type
dBm ( = Log)
dBm | dBmV | dBuV | Watts | Volts | Amps
AMPTD Y Scale, Y Axis Units
UNIT:OBW:POW DBM
AMPTD Y Scale, Y Axis Units, dBm
Occupied Bandwidth Measurement
Scale Type (Lin)
Y Axis Units
Scale Type
has been set to Lin and
sets the Y Axis Units to V. Pressing
Mode
scales the
to dBm,
Scale
95