Agilent Technologies N1996A-503 User Reference page 279

Mode
Preset
State Saved
Key Path
IP Config Displays the menu keys that select the method used to assign the analyzer IP address.
You can choose not to use a LAN IP address or to assign a static address with a specific number. It
can also be assigned automatically using the DHCP or Auto IP functions.
Mode
Preset
State Saved
Key Path
None Enables the option of not accepting a LAN connection. Even if a LAN connection is made, the network
cannot connect to the instrument. This selection disables the IP Address, Net Mask and Gateway features.
Mode
Notes
Key Path
DHCP Selects the DHCP function for assigning the IP address. When you connect to a network with DHCP
selected, if the Host Name is recognized by the network, then an IP address and other network information will
automatically assigned.
Mode
Notes
Key Path
Chapter 4
All
local host
Survives Preset and power cycle, but not saved in Instrument
State.
System, Controls, IP Admin, Host Name
All
Not affected by Preset.
Survives Preset and power cycle, but not saved in Instrument
State.
System, Controls, IP Admin, IP Config
All
Selecting None disables IP Address, Net Mask, and Gateway key
functions.
System, Controls, IP Admin, IP Config, None
All
Selecting DHCP disables IP Address, Net Mask, and Gateway key
functions.
System, Controls, IP Admin, IP Config, DHCP
Utility and Control/Sweep Functions
Utility Functions
279