Calculate:lmask[1]|2:First:segment:left:level <Ampl; Calculate:lmask[1]|2:First:segment:left:level - Agilent Technologies N1996A-503 User Reference

Key Path
1st Segment (Left or Right Limits)
1st Segment
Sets to allow definition of the limits Left or Right of the center segment. The Left or
Right amplitude limits can be changed with the
changed with the limits menu
Segments
the key.
Mode
Notes
Remote Command
Notes
Preset
State Saved
Range
Key Path
Level: 1st Segment Left
Sets the power level, for the 1
1st
available when has been selected with the
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Chapter 3
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment
Level
key. The Left or Right span limits can be
Span
key. This key is only available when
SA
Key is only displayed when the selected segment is 1
The Limit Mask SCPI command syntax uses:
The keyword "LEFT" to define the level and span for the
segment to the Left of the center segment.
The keyword "RIGHt" to define the level and span for the
segment to the Right of the center segment.
Not affected by a preset but set per default to Left after a power
cycling
Saved in instrument state.
Left | Right
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment (Left or Right)
st
segment to the Left of the Center segment. This key is only
Segments
SA

:CALCulate:LMASk[1]|2:FIRSt:SEGMent:LEFT:LEVel

<ampl>
:CALCulate:LMASk[1]|2:FIRSt:SEGMent:LEFT:LEVel?
:CALC:OBW:LMAS:SEGM:FIRS:LEFT:LEV –14 dBm
Key is only displayed when the selected segment is 1
selected segment side is Left.
Value is displayed on the key in the currently selected Y Axis
Unit.
Meas Off (Spectrum Analyzer) Measurement
1st
has been selected with
key.
Mode
st
.
st
, and the
65