Calculate:obwidth:lmask[1]|2:Segment:first:left:span <Frequency; Calculate:obwidth:lmask[1]|2:Segment:first:left:span - Agilent Technologies N1996A-503 User Reference

Preset
State Saved
Key Path
Default Unit
Span: 1st Segment Left
Sets the frequency span for the 1
1st
available when has been selected with the
Mode
Remote Command
Example
Notes
Dependencies /
Couplings
Preset
State Saved
Min
Max
Key Path
Default Unit
Span: 1st Segment Right
Sets the frequency span for the 1
1st
available when has been selected with the
Mode
Chapter 3
Not affected by a preset but set per default to –10 dBm after a
power cycling
Saved in instrument state.
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment: Right Level
dBm
st
segment to the Left of the Center segment. This key is only
Segments
SA
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt:LEFT:SPA
N <frequency>
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt:LEFT:SPA
N?
:CALC:OBW:LMAS1:SEGM:FIRS:LEFT:SPAN 1.75 MHz
Key is only displayed when the selected segment is 1
selected segment side is Left.
st nd
If the Center, 1 , and 2
span adjusts on a change in the left 1
Not affected by a preset but set per default to 2 MHz after a
power cycling
Saved in instrument state.
0 Hz
See Restriction & Notes
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment: Left Span
Hz
st
segment to the Right of the Center segment. This key is only
Segments
SA
Occupied Bandwidth Measurement
key.
segments are On, the left 2
st
segment span.
key.
Mode
st
, and the
nd
segment
115