Agilent Technologies N1996A-503 User Reference page 199

Avg Limits On/Off Turns on/off the average limit values.
Mode
Preset
Range
Key Path
Max Loss Limit Sets the maximum average limit value. If the average limits are turned on, then
the measured average insertion loss will be compared with this value.
Mode
Preset
Key Path
Min Loss Limit Sets the minimum average limit value. If the average limits are turned on, then
the measured average insertion loss will be compared with this value.
Mode
Preset
Key Path
Trace/Detector
Trace/Detector
Accesses the
the acquisition, display, storage, detection and manipulation of trace data. The
Trace/Detector
keys are for setting up a One Port Insertion Loss measurement. The
measurement must already be running to access these keys. Press
Loss
to turn on the measurement.
Mode
Key Path
Chapter 3
Stimulus / Response
0
On|Off
Meas Setup, Avg Limits, Avg Limits On/Off
Stimulus / Response
10 dB
Meas Setup, Avg Limits, Max Loss Limit
Stimulus / Response
0 dB
Meas Setup, Avg Limits, Min Loss Limit
Trace/Detector
menu keys.
Stimulus / Response
Front-panel key
One Port Insertion Loss Measurement
menu keys allow the user to control
Meas One Port Insertion
,
Mode
199