Agilent Technologies N1996A-503 User Reference page 204

Mode
Return Loss
FREQ/Channel
FREQ/Channel
The following
measurement must already be running to access these keys. Press
turn on the measurement.
Mode:
Key Path
Start Freq
Use this key to specify the Start Frequency of your frequency range.
Mode
State Saved
Range
Key Path
Stop Freq
Use this key to specify the Stop Frequency of your frequency range.
Mode
Remote Command
Notes
Preset
State Saved
Range
Key Path
SCPI Status Bits/OPC
Dependencies
Calibrate
Use this key to start the process of calibrating your measurement. Follow the instructions
on the screen to complete the calibration process.
204
keys are for setting up a Return Loss measurement. The
SA
Front-panel key
Stimulus / Response
Saved in State
10 MHz to 3.0 GHz (Option 503) / to 6.0 GHz (Option 506)
FREQ/Channel, Start Freq
Stimulus / Response
The default/min/max/range values provided below are valid
only in the Frequency Domain. Time domain (zero span) values
will be different.
3.0 GHz (Option 503), 6.0 GHz (Option 506)
Saved in State
10 MHz to 3.0 GHz (Option 503) / to 6.0 GHz (Option 506)
FREQ/Channel, Stop Freq
Non-overlapped
Meas Return Loss
, to
Chapter 3