Agilent Technologies N1996A-503 User Reference page 218

Mode
Return Loss
State Saved
Min
Max
Key Path
Default Unit
Level: 2nd Segment Right
Sets the power level, for the 2
nd
2
has been selected with the
Mode
Notes
Preset
State Saved
Min
Max
Key Path
Default Unit
Trace/Detector
Trace/Detector
Accesses the
the acquisition, display, storage, detection and manipulation of trace data. The
Trace/Detector
keys are for setting up a Return Loss measurement. The measurement must
already be running to access these keys. Press
measurement.
Mode
Range
Key Path
218
Saved in instrument state.
–10 dB
150 dB
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Left Level
dB
nd
segment to the Right of the Center segment. This key is only available when
Segments
key.
Stimulus / Response
Key is only displayed when the selected segment is 2
selected segment side is Right.
Not affected by a preset but set per default to 30 dB after a
power cycling
Saved in instrument state.
–10 dB
150 dB
Meas Setup, Limit Masks, Limit Mask 1, 2nd Segment: Right Level
dB
Trace/Detector
menu keys.
Meas
Stimulus / Response
Two Port Insertion Loss | One Port Insertion Loss | Return Loss
| Distance to Fault
Front-panel key
menu keys allow the user to control
Return Loss
, to turn on the
nd
, and the
Chapter 3