Agilent Technologies N1996A-503 User Reference page 41

Default Unit
Stop Freq
Sets the frequency at the right side of the graticule.
Stop Freq
When reaches the lower frequency limit, the start frequency is set to the lowest
available frequency and the stop frequency is changed to be more than the start frequency
by the minimum span (1
one-half of the span, or to the start frequency plus 500 Hz, and
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
Key Path
Default Unit
CF Step
Enables you to set the step size for the center frequency and start/stop frequency functions.
Once a step size has been selected and the center frequency function is active, the step
keys change center frequency by the step-size value. In addition, the step keys change the
start and stop frequencies twice the value of the CF Step setting. The step size function is
useful for finding harmonics and sidebands beyond the current frequency span of the
analyzer.
Remote Command
Example
Chapter 3
Hz
Center Freq
). will be updated to the start frequency plus
kHz
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
FREQ:STOP 220 MHz
FREQ:STOP?
The preset/min/max/range values provided below are valid only in
the Frequency Domain. Time domain (zero span) values will be
different.
3 GHz (Option 503), 6 GHz (Option 506)
Saved in State
500 Hz to 3.02 GHz (Option 503) / to 6.02 GHz (Option 506)
FREQ Channel, Stop Freq
Hz
[:SENSe]:FREQuency:CENTer:STEP[:INCRement] <freq>
[:SENSe]:FREQuency:CENTer:STEP[:INCRement]?
FREQ:CENT:STEP 500 MHz
FREQ:CENT:STEP?
Meas Off (Spectrum Analyzer) Measurement
Res BW
will be set to 10 Hz.
Mode
41