IEEE and STATus Commands (Remote Commands Only)
Standard Event Status Register Query
Standard Event Status Register Query
Queries and clears the standard event status event register. (This is a destructive read.)
The value returned is a hexadecimal number that reflects the current state (0/1) of all the
bits in the register.
Mode
Remote Command
Example
Remote Command
Notes
Preset
Min
Max
SCPI Status Bits/OPC
Dependencies
346
All modes
*ESR?
*ESR? Returns a 1 if there is either a query or command
error, otherwise it returns a zero.
For related commands, see the STATus subsystem commands.
0
0
255
Standard Event Status Register (bits 0 – 7)
Chapter 7