FibroLAN Falcon-RX/812/G/A User Manual page 98

Falcon R-Class | User Guide
•
•
•
•
•
•
Privilege Levels The Privilege Levels can be configured between 0 to 15 (where 0 is lowest
level and 15 is highest level) Every group has an authorization Privilege
level for the following sub-groups: configuration read-only,
configuration/execute read-write, status/statistics read-only,
status/statistics read-write (e.g., for clearing of statistics). User Privilege
should be same or greater than the authorization Privilege level to have the
access to that group.
4.8.1.3 Authentication Method Configurations
This subsection allows you to configure how a user is authenticated when he logs into the switch via
one of the management client interfaces. The figure has one row for each client type and several
columns.
Web GUI: Configuration > Security > Switch > Auth Method
Figure 4-66: Authentication Method Configurations displays.
98
Security: Authentication, System Access Management, Port (contains
Dot1x port, MAC based and the MAC Address Limit), ACL, HTTPS, SSH,
ARP Inspection and IP source guard.
IP: Everything except 'ping'.
Port: Everything except 'VeriPHY'.
Diagnostics: 'ping' and 'VeriPHY'.
Maintenance: CLI- System Reboot, System Restore Default, System
Password, Configuration Save, Configuration Load and Firmware Load.
Web- Users, Privilege Levels and everything in Maintenance.
Debug: Only present in CLI.