Dscp Translation - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-53: DSCP Based QoS Ingress Classification Parameters
DSCP DSCP
It is a field in the header of IP packets for packet classification purposes
Maximum number of supported DSCP values is 64.
Trust Controls whether a specific DSCP value is trusted.
Only frames with trusted DSCP values are mapped to a specific QoS class and
Drop Precedence Level.
Frames with untrusted DSCP values are treated as a non-IP frame.
QoS Class QoS class value can be any of (0-7)
DPL Drop Precedence Level (0-1).
Every incoming frame is classified to a Drop Precedence Level (DP level), which
is used throughout the device for providing congestion control guarantee to the
frame according to what was configured for that specific DP level.
A DP level of 0 (zero) corresponds to 'Committed' (Green) frames and a DP level
of 1 corresponds to 'Discard Eligible' (Yellow) frames.

DSCP Translation

This section allows you to configure the basic QoS DSCP Translation settings for all switches. DSCP
translation can be performed in Ingress or Egress.
85
is an acronym for Differentiated Services Code Point.