FibroLAN Falcon-RX/812/G/A User Manual page 138

Falcon R-Class | User Guide
Buttons
4.8.3.2 VLAN Mode Configuration
This section provides ARP enabled on which VLAN.
Figure 4-86: VLAN Mode Configurations display
138
•
Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you must enable the
setting of "Check VLAN". The default setting of "Check VLAN" is disabled.
When the setting of "Check VLAN" is disabled, the log type of ARP
Inspection will refer to the port setting. And if the setting of "Check
VLAN" is enabled; the log type of ARP Inspection will refer to the VLAN
setting. Possible setting of "Check VLAN" are:
•
Enabled: Enable check VLAN operation.
•
Disabled: Disable check VLAN operation.
Only if the Global Mode and Port Mode on a given port are enabled, and
the setting of "Check VLAN" is disabled, the log type of ARP Inspection
will refer to the port setting. There are four Log Type and possible types
are:
•
None: Log nothing.
•
Deny: Log denied entries.
•
Permit: Log permitted entries.
•
ALL: Log all entries.
Translate dynamic to static: Click to translate all dynamic entries to static
entries.