Igmp Snooping Port Group Filtering Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
LLQI (LMQI for IGMP) Last Member Query Interval. The Last Member Query Time is the time
URI
Buttons
Note: by clicking on "Add New IGMP VLAN", we get the following display:
Refer to previous table for terminology.

IGMP Snooping Port Group Filtering Configuration

Web GUI: Configuration > IPMC > IGMP Snooping > Port Filtering Profile
Figure 4-143: IGMP Snooping Port Group Filtering Configuration
200
value represented by the Last Member Query Interval, multiplied by the
Last Member Query Count. The allowed range is 0 to 31744 in tenths of
seconds, default last member query interval is 10 in tenths of seconds
(1 second).
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second.
Add New IGMP VLAN: Click to add new IGMP VLAN. Specify the VID and
configure the new entry. Click "Save". The specific IGMP VLAN starts
working after the corresponding static VLAN is also created.