FibroLAN Falcon-RX/812/G/A User Manual page 147

Table of Contents

Advertisement

Falcon R-Class | User Guide
Bad
Rx
Authentica
tors
Unknown
Rx
Types
Packets
Rx
Dropped
Access
Tx
Requests
Access
Tx
Retransmis
sions
Pending
Tx
Requests
Tx
Timeouts
Other Info
Name
RFC4668 Name
IP
-
Address
State
-
147
radiusAuthClientExtBadAut
henticators
radiusAuthClientExtUnknow
nTypes
radiusAuthClientExtPackets
Dropped
radiusAuthClientExtAccessR
equests
radiusAuthClientExtAccess
Retransmissions
radiusAuthClientExtPending
Requests
radiusAuthClientExtTimeou
ts
This section contains information about the state of the server and
the latest round-trip time.
Description
IP address and UDP port for the authentication server in question.
Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet
up and running.
Ready: The server is enabled, IP communication is up and running,
and the RADIUS module is ready to accept access attempts.
The number of RADIUS Access-Response packets
containing invalid authenticators or Message
Authenticator attributes received from the
server.
The number of RADIUS packets that were
received with unknown types from the server on
the authentication port and dropped.
The number of RADIUS packets that were
received from the server on the authentication
port and dropped for some other reason.
The number of RADIUS Access-Request packets
sent to the server. This does not include
retransmissions.
The number of RADIUS Access-Request packets
retransmitted to the RADIUS authentication
server.
The number of RADIUS Access-Request packets
destined for the server that have not yet timed
out or received a response. This variable is
incremented when an Access-Request is sent and
decremented due to receipt of an Access-Accept,
Access-Reject, Access-Challenge, timeout, or
retransmission.
The number of authentication timeouts to the
server. After a timeout, the client may retry to the
same server, send to a different server, or give
up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a
different server is counted as a Request as well as
a timeout

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Falcon-rx/812/g/d

Table of Contents