Vlan Membership Status For Combined Users - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Untagged VLAN ID If Tx Tag is overridden by the selected user and is set to Tag or Untag
UVID, then this field will show the VLAN ID the user wants to tag or untag
on egress. The field is empty if not overridden by the selected user.
Conflicts Two users may have conflicting requirements to a port's configuration.
For instance, one user may require all frames to be tagged on egress
while another requires all frames to be untagged on egress. Since both
users cannot win, this gives rise to a conflict, which is solved in a
prioritized way. The Administrator has the least priority. Other software
modules are prioritized according to their position in the drop-down list:
The higher in the list, the higher priority. If conflicts exist, it will be
displayed as "Yes" for the "Combined" user and the offending software
module.
The "Combined" user reflects what is configured in hardware.
Buttons Select function associated VLAN from this drop-down list.

VLAN Membership Status for Combined users

This section provides an overview of membership status of VLAN users.
VLAN User
Various internal software modules may use VLAN services to configure VLAN memberships on the
fly. The drop-down list on the right allows for selecting between showing VLAN memberships as
configured by an administrator (Admin) or as configured by one of these internal software modules.
The "Combined" entry will show a combination of the administrator and internal software modules
configuration, and basically reflects what is configured in hardware
Navigating the VLAN Membership Status page
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found in the
VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Clicking the
Refresh button will update the displayed table starting from that or the closest next VLAN Table
match.
The >> will use the last entry of the currently displayed VLAN entry as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the <<
button to start over.
52
.