Falcon R-Class | User Guide
5.3 Simple Network Management Protocol (SNMP)
R Class series supports SNMP management, inspection and configuration.
The following screens are used to set SNMP System Configuration and SNMP Trap settings.
•
SNMP System Configuration
•
SNMPv3 Trap Configuration
•
SNMPv3 Community Configuration
•
SNMPv3 Users Configuration
•
SNMPv3 Group Configuration
•
SNMPv3 View Configuration
•
SNMPv3 Access Configuration
SNMP System Configuration
Web GUI: Configuration > SNMP > System
Figure 5-19: SNMP System Configuration display
Table 5-18: SNMP System Configuration Parameters
SNMP System Configuration
Mode
Indicate the SNMP mode operation. Possible modes are:
•
•
Engine ID
Indicates the SNMPv3 engine ID. The string must contain an even number
(in hexadecimal format) with number of digits between 10 and 64, but all-
zeros and all-'F's are not allowed. Change of the Engine ID will clear all
original local users.
275
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.