FibroLAN Falcon-RX/812/G/A User Manual page 233

Falcon R-Class | User Guide
4.18.3.4 Port Statistics
The R Class series unit provides an overview of all LLDP traffic. Two types of counters are shown:
Global counters are counters that refer to the whole switch, while local counters (LLDP Statistics)
refer to counters for the currently selected switch port.
Web GUI: Monitor > LLDP > Port Statistics
Figure 4-167: Port Statistics
Table 4-160: Port Statistic Parameters
Global Counters
Clear Global
counters
Neighbor entries
were last changed
Total Neighbor
Entries added
Total Neighbor
Entries Deleted
Total Neighbor
Entries Dropped
233
If checked the global counters are cleared when Clear is pressed.
Shows the time for the last entry when was last deleted or added. It also
shows the time elapsed since last change was detected.
Shows the number of new entries added since switch reboot.
Shows the number of new entries deleted since switch reboot.
Shows the number of LLDP frames dropped due to that the entry table
was full.