Authentication Server Configuration (Aaa) - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Dynamic ARP Inspection Table
Port Switch Port Number for which the entries are displayed
VLAN ID VLAN-ID in which the ARP traffic is permitted.
MAC Address User MAC address of the entry
IP Address User IP address of the entry.
Navigating the ARP Inspection Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show the
first 20 entries from the beginning of the Dynamic ARP Inspection Table. The "Start from port
address", "VLAN", "MAC address" and "IP address" input fields allow the user to select the starting
point in the Dynamic ARP Inspection Table. Clicking the Refresh button will update the displayed
table starting from that or the closest next Dynamic ARP Inspection Table match. In addition, the
two input fields will - upon a Refresh button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address. The >> will use the last entry of the
currently displayed table as a basis for the next lookup. When the end is reached the text. No more
entries" is shown in the displayed table.
Use the << button to start over.

Authentication Server Configuration (AAA)

This section allows to configure the various Authentication Servers.
4.8.4.1 Radius Server Configuration
This section allows you to configure the
Web GUI: Monitor > Security > AAA > Radius
Figure 4-89: Radius: Server Configuration
Table 4-85: Radius: Server Configuration Parameters
141
servers
RADIUS .