FibroLAN Falcon-RX/812/G/A User Manual page 88

Falcon R-Class | User Guide
Table 4-55: Quality of Service Control List Configuration Parameters
QCE Indicates the QCE.id
Port Indicates the list of ports configured with the QCE or Any.
DMAC Specify the type of Destination MAC addresses for incoming frame. Possible
values are:
•
•
•
•
The default value is Any.
SMAC Match specific source MAC address or Any. If a port is configured to match
on destination addresses, this field indicates the DMAC.
Tag Type Indicates tag type. Possible values are:
•
•
•
The default value is 'Any'.
VID Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the
range 1-4095 or 'Any
PCP Priority Code Point: Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range
(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1
or Any.
Frame Type Indicates the type of frame. Possible values are:
Any
Ethernet
allowed.
•
•
•
•
Action Indicates the classification action taken on ingress frame if Parameters
configured are matched with the frame's content. Possible actions are:
•
•
•
•
•
•
Button
Modification
88
Any: All types of Destination MAC addresses are allowed.
Unicast: Only Unicast MAC addresses are allowed.
Multicast: Only Multicast MAC addresses are allowed.
Broadcast: Only Broadcast MAC addresses are allowed.
Any: Match tagged and untagged frames.
Untagged: Match untagged frames.
Tagged: Match tagged frames.
: match any frame type.
: Match Ethernet type frames
LLC: Match (LLC) frames.
SNAP: MMatch (NAP) frames
IPv4: Match IPV4 frames.
IPv6: Match IPV6 frames.
CoS: Classify Class of Service
DPL: Classify Drop Precedence Level.
DSCP: Classify DSCP value
PCP: Classify PCP value.
DEI: Classify DEI value.
Policy: Classify ACL Policy number.
: The lowest plus sign adds a new QCE before the current row.
LLC : Only (LLC) frames are