FibroLAN Falcon-RX/812/G/A User Manual page 178

Falcon R-Class | User Guide
SyncE Configuration
SSM Option Select
SSM Free Run
SSM Holdover
Figure 4-128: SyncE Port Configuration
Table 4-121: SyncE Port Configuration Parameters
SyncE Ports
Port
SSM Enable
Tx SSM: Quality Level Monitoring of the transmitted SSM QL on this port. Transmitted QL should be
Tx SSM: SSM code
(hex)
178
Select the system network region option:
•
SSM Option 1 - refers to synchronization networks designed for Europe.
•
SSM Option 2 - refers to synchronization networks designed for US.
Set the SSM output quality level in Free Run state: PRC, SSUB, SSUA, EEC1, DNU
Set the SSM output quality level in Holdover state: PRC, SSUB, SSUA, EEC1, DNU
The port number to configure.
Enable and disable of SSM functionality on this port.
the Quality Level of the clock generated by this node. This means the QL of the
clock source this node is locked to.
Displaying the actual hex code used to indicate the transmitted Quality.