Lacp Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Revertive
Max Bundle

LACP Configuration

Web GUI: Configuration > Aggregation > LACP
Figure 4-155: LACP Configuration
Table 4-148: LACP Port Parameters
Port The switch port number.
LACP Show whether LACP is currently enabled on this switch port.
Timeout The Timeout controls the period between BPDU transmissions. Fast will transmit
LACP packets each second, while Slow will wait for 30 seconds before sending a
LACP packet.
Prio The Prio controls the priority of the port, range 1-65535. If the LACP partner
wants to form a larger group than is supported by this device, then this
parameter will control which ports will be active and which ports will be in a
backup role. Lower number means greater priority.
213
This parameter only applies to LACP-enabled groups. It
determines if the group will perform automatic link (re-
)calculation when links with higher priority becomes available.
This parameter only applies to LACP-enabled groups. It
determines the maximum number of active bundled LACP ports
allowed in an aggregation.