FibroLAN Falcon-RX/812/G/A User Manual page 194

Falcon R-Class | User Guide
Role The current STP port role. The port role can be one of the following values:
Alternate Port
BackupPortRootPort
Designated Port
State The current STP port state. The port state can be one of the following values:
Discarding
Learning
Forwarding
Path Cost The current STP port path cost. This will either be a value computed from the
Auto setting, or any explicitly configured value
Edge The current STP port (operational) Edge Flag. An Edge Port is a switch port to
which no Bridges are attached. The flag may be automatically computed or
explicitly configured. Each Edge Port transits directly to the Forwarding Port
State, since there is no possibility of it participating in a loop.
Point-to-Point The current STP port point-to-point flag. A point-to-point port connects to a
non-shared LAN media. The flag may be automatically computed or explicitly
configured. The point-to-point properties of a port affect how fast it can transit
to STP state.
Uptime The time since the bridge port was last initialized.
4.15.7.3 STP Port Status
This section displays the STP CIST port status for physical ports switch.
Web GUI: Monitor > Spanning Tree > Port Status
Figure 4-139: STP Port Status
194