FibroLAN Falcon-RX/812/G/A User Manual page 62

Falcon R-Class | User Guide
Table 4-34: IP Subnet based VLAN Membership Configuration parameters
Delete
IP Address
Mask Length
VLAN ID
Port Members
Adding a New IP subnet based VLAN
Click Add New Entry: to add a new IP subnet to VLAN ID mapping entry. An empty row is added
to the table, and the mapping can be configured as needed. Any IP address/mask can be
configured for the mapping. Legal values for the VLAN ID are 1 to 4095. The IP subnet to VLAN ID
mapping entry is enabled when you click on Save.
The Delete button can be used to undo the addition of new mappings The maximum possible IP
subnet to VLAN ID mappings are limited 128
62
To delete a mapping, check this box and press save. The entry will be
deleted in the stack.
Indicates the subnet's IP address (Any of the subnet's host addresses can
be also provided here, the application will convert it automatically).
Indicates the subnet's mask length.
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID
is a unique matching.
A row of check boxes for each port is displayed for each IP subnet to VLAN
ID mapping entry. To include a port in a mapping, simply check the box. To
remove or exclude the port from the mapping, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked