FibroLAN Falcon-RX/812/G/A User Manual page 215

Falcon R-Class | User Guide
Table 4-151: Partner System Status Parameters
Partner System Status
This table display the partner system information for each LACP aggregation group.
Aggr ID
Partner System ID
Partner Prio
Partner Key
Last changed
Local Ports
4.17.5.2 Internal Status
Web GUI: Monitor > Aggregation > LACP > Internal Status
Figure 4-158: LACP Internal Status
Table 4-152: LACP Internal Status Parameters
Internal Status
This page provides a status overview for the LACP internal (i.e. local system) status for all
ports. Only ports that are part of an LACP group are shown. For details on the shown
parameters please refer to IEEE 801.AX-2014.
Port
State
Key
Priority
Activity
Timeout
Aggregation
215
The Aggregation ID associated with this aggregation instance.
The system ID (MAC address) of the aggregation partner.
The priority that the partner has assigned to this aggregation ID.
The Key that the partner has assigned to this aggregation ID.
The time since this aggregation changed.
Shows which ports are a part of this aggregation for this switch.
The switch port number.
The current port state:
•
Down: The port is not active.
•
Active: The port is in active state.
•
Standby: The port is in standby state.
The key assigned to this port. Only ports with the same key can
aggregate together.
The priority assigned to this aggregation group.
The LACP mode of the group (Active or Passive).
The timeout mode configured for the port (Fast or Slow).
Show whether the system considers this link to be
"aggregateable"; i.e., a potential candidate for aggregation.