FibroLAN Falcon-RX/812/G/A User Manual page 59

Falcon R-Class | User Guide
4.6.6.2 Protocol based VLAN
This section allows you to add a new Protocol to a Group Name (each protocol can be part of only
one Group) mapping entries as well as allow you to see and delete already mapped entries for the
There are two subjects:
•
Protocol to Group Mapping Table.
•
Group Name to VLAN mapping TableWeb GUI: Configuration > VCL > Protocol-based VLAN >
Protocol to Group
Figure 4-35: Protocol to Group Mapping Table display
Table 4-32: Protocol to Group Mapping Table parameters
Delete To delete a Protocol to Group Name map entry, check this box. The entry will
be deleted from the switch during the next Save.
Frame Type Frame type can have one of the following values:
•
•
•
Note: When changing the Frame type field, the valid value of the following
text field will vary depending on the new frame type you selected.
Value Valid value that can be entered in this text field depends on the option
selected from the preceding Frame Type selection menu. Below are the
criteria for the three different Frame Types:
•
•
•
59
Ethernet
LLC
SNAP
Ethernet: Value in the text field when Ethernet is selected as a Frame
Type is called etype. Valid values for etype range between 0x0600 and
0xffff.
LLC: Valid value in this case is comprised of two different sub-values.
o DSAP: 1-byte long string (0x00-0xff)
o SSAP: 1-byte long string (0x00-0xff).
SNAP: Valid value in this case is also comprised of two different sub-
values.
o OUI: OUI (Organizationally Unique Identifier) is a parameter in
the format of xx-xx-xx where each pair (xx) in the string is a
hexadecimal value ranging between 0x00 and 0xff.
o PID: PID (Protocol ID). If OUI is hexadecimal 000000, then the
protocol ID is the Ethernet type (EtherType) field value for the