FibroLAN Falcon-RX/812/G/A User Manual page 25

Falcon R-Class | User Guide
4.3.5.2 NTP Server Configuration
Falcon-RX NTP server function allows it to propagate the SyncCenter time via NTP to other clients
in the network. The server supports three operational modes: Unicast, Broadcast and Multicast.
Allowed polling rate and encryption can be set for each mode separately.
Figure 4-8: NTP Server Configuration
Table 4-6: NTP Server Configuration Parameters
Client Configuration
Mode
Server ID
Server IP
Min Poll
Max Poll
MD5 Key
Key ID
25
Indicates the NTP Client operation mode. Possible modes are:
Enabled: Enable NTP mode operation.
Disabled: Disable NTP mode operation.
Up to 5 different servers can be configured
Provide the IPv4 or Ipv6 address of a NTP server..
Value in seconds. Available selected options are 2
Value in seconds. Available selected options are 2
Enable per server MD5 encryption for NTP session authentication
Set per server MD5 encryption key value for NTP session
3 4 5 17
, 2 , 2 ... 2
3 4 5 17
, 2 , 2 ... 2