Falcon R-Class | User Guide
4.8 Security Features
R Class series enables a set of security features. Security is realized by several different mechanisms
included in the Switch and Network section.
Switch
The Switch section contains the following sub-sections:
•
User Configuration
•
Privilege Level Configuration
•
Authentication Method Configuration
•
SSH Configuration
•
HTTPS Configurations
•
Access Management Configuration
•
Access Management Statistics
4.8.1.1 User Configuration
This subsection provides an overview of the current users.
Currently the only way to login as another user on the web server is to close and reopen the browser.
Web GUI: Configuration > Security > Switch > Users
Figure 4-63: User Configuration
Table 4-59: User Configuration Parameters
Username
The name identifying the user.
Privilege level
The privilege level of the user. The allowed range is 0 to 15. If the privilege
level value is 15, it can access all groups, i.e., that is granted the fully control
of the device. But others value need to refer to each group privilege level.
User's privilege should be same or greater than the group privilege level to
have the access of that group. By default setting, most groups privilege level
5 has the read-only access and privilege level 10 has the read-write access.
And the system maintenance (software upload, factory defaults etc.) need
user privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and
privilege level 5 for a guest account.
Buttons
Add New User: Click to add a new user. The maximum numbers of users is
20.
95