FibroLAN Falcon-RX/812/G/A User Manual page 140

Falcon R-Class | User Guide
MAC Address Allowed Source MAC address in ARP request packets
IP Address Allowed Source IP address in ARP request packets
Buttons Add New Entry: Click to add a new entry to the Static ARP Inspection table.
4.8.3.4 Dynamic ARP Inspection Table
Web GUI: Monitor > Security > Network > ARP Inspection > Dynamic Table
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP Inspection
Table contains up to 256 entries, and is sorted first by port, then by VLAN ID, then by MAC address,
and then by IP address. All dynamic entries are learning from DHCP Snooping.
Figure 4-88: Dynamic ARP Inspection Table display
Table 4-84: Dynamic ARP Inspection Table parameters
140