Qos Statistics; Qos Control List Status - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide

QoS Statistics

Web GUI: Monitor > Ports > Traffic Overview
Figure 4-20: Queuing Counters Display
Table 4-17: Queuing Counters Parameters
Port The logical port for the settings contained in the same row.
Qn There are
Rx/Tx The number of received and transmitted packets per queue.
By clicking selected port number, you get its detailed port statistics page. For details, refer to
Port Statistics.

QoS Control List Status

This section shows the QCL status by different QCL users. Each row describes the QCE that is defined.
It is a conflict if a specific QCE is not applied to the hardware due to hardware limitations. The
maximum number of QCEs is 256 on each switch.
QCL is an acronym for QoS Control List. It is the list table of QCEs, containing QoS control entries that
classify to a specific QoS class on specific traffic objects. Each accessible traffic object contains an
identifier to its QCL. The privileges determine specific traffic object to specific QoS class.
is an acronym for QoS Control Entry. It describes QoS class associated with a particular QCE ID.
QCE
There are six QCE frame types: Ethernet Type, VLAN, UDP/TCP Port, DSCP, TOS, and Tag Priority.
Frames can be classified by one of 4 different QoS classes: "Low", "Normal", "Medium", and "High"
for individual application.
Web GUI: Monitor > Ports > QCL Status
Figure 4-21: QoS Control List Status
36
QoS queues per port. Q0 is the lowest priority queue.
8
Detailed