Synccenter General/Frequency/Phase/Tod Status - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide

SyncCenter General/Frequency/Phase/ToD Status

Figure 4-101: SyncCenter Status
Table 4-96: SyncCenter Status parameters
SyncCenter Status
State
Locked to
Offset from GNSS
(nSec)
Time in State
Time in current
output quality
WTR Active
WTR Time
Clear button
Buttons
155
Shows the current SyncCenter state, which includes:
•
Free Run - indicates Free running (internal clock) state.
•
Lock Acquisition - indicates the system locking on selected reference.
•
Locked – indicates the system locked to selected reference.
•
Holdover - reference was lost, system is maintaining clocked output.
•
Holdover Recovery - reference rediscovered, system resyncs.
Indicates the sync source (type and port/instance) the system is currently
locked to (e.g., PTP, GPS, etc.).
N/A
The time that has passed since the last system sync state change.
The time that has passed since the last output QL change.
Indicates the current active status of the WTR timer. Green means timer is
not running (i.e., system stable), Amber means timer is currently running,
and Grey indicates WTR is disabled.
Indicates the time left before the WTR timer expires (when running).
Allows resetting of the WTR timer when running (i.e., skip the WTR period).
Monitor Direct link to the Sync Center monitoring page.
Other Buttons: Direct link to relevant pages.