Falcon R-Class | User Guide
1
Introduction
1.1 R Class series overview
Falcon-RX
Falcon-RX is a high performance, 5G xHaul Timing Aware O-RAN Switch & PTP Grandmaster. It is a
high capacity, low latency transport and high precision synchronization device that enables 5G RAN
operation at its optimal throughput, on both telecom and enterprise environments.
The Falcon-RX combines the best of breed of the Transport and Timing worlds, in a single powerful
package. Both elements are critical for 5G fronthaul deployments, along with support for the latest
O-RAN architectures and recommendations.
The Falcon-RX is equipped with up to twenty (20) multi-rate 10G SFP+ ports or eight (8) 25G SFP28
ports, based on user configuration. Additionally, one tri-speed Copper management port is included.
All ports can operate at full wire speed, with a total forwarding capacity of 200Gbps.
The system offers advanced Quality of Service (QoS) features including classification and mapping
based on layer 1 through layer 4 attributes, rate limiting, highly flexible scheduling, queuing and
shaping options and MEF defined services.
1.2 Physical Description
Falcon-RX/812/G
Figure 1-1: Falcon-RX/812/G front panel
Figure 1-2: Falcon-RX/812/G back panel
Table 1-1: Falcon-RX/812/G Front Panel Description
①
12x 1/10G BaseX
②
8x 1/10/25G BaseX
③
1x 10/100/1000 BaseT (management)
④
RJ45 and USB Console
⑤
GNSS antenna TNC connector (5VDC)
⑥
1.5 / 2 Mbps BITS input/output
⑦
LEDs indicators PSU1/PSU2
8
⑧
LEDs indicators Link/Activity (per port)
⑨
2x Sync SMA input/output – 1PPS/10 MHz
⑩
RJ45 input/output ToD/1PPS
⑪
LEDs indicators Sync/GNSS/CPU/Aux.
⑫
Expansion module for Rubidium clock
⑬
PSU1 – AC/DC options supported
⑭
PSU2 – AC/DC options supported