Detailed Port Statistics - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-18: QoS Control List Status Parameters
User Indicates the QCL user.
QCE Indicates the index of QCE.
Frame type Indicates the type of frame to look for incoming frames. Possible frame types are:
•
Any: Match any frame type.
•
Ethernet: Match Ether type frames.
•
LLC: Match (LLC) frames
•
SNAP: Match (SNAP) frames
•
IPv4: Match IPV4 frames.
•
IPv6: Match IPV6 frames.
Port Indicates the list of ports configured with the QCE.
Action Indicates the classification action taken on ingress frame if Parameters configured are
matched with the frame's content.
•
There are three action fields: Class, DPL and DSCP.
•
CoS: Classify Class of Service
•
DPL: Classify Drop Precedence Level
•
DSCP: Classify DSCP value
•
PCP: Classify PCP value
•
DEI: Classify DEI value.
•
Policy: Classify ACL Policy number.
•
Ingress Map: Classify Ingress Map ID.
Conflict Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that the resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources required to
add QCL entry on pressing 'Resolve Conflict' button.
Buttons Combined: Select the QCL status from this drop-down list
Resolve Conflict: Click to release the resources required to add QCL entry in case the
conflict status for any QCL entry is 'yes'.

Detailed Port Statistics

This section provides detailed traffic statistics for a specific switch port. Use the port select box to
select which switch port details to display.
The displayed counters are the totals for receive and transmit, the size counters for receive and
transmit, and the error counters for receive and transmit.
37