System Information; System Information Configuration; Ip Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
•
ACL:(Access Control List) The ACL can drop a frame or redirect it to a specific port
•
MAC address and VLAN: The standard Ethernet switch forwarding – a frame is forwarded by
searching the learn-table and sending it to the port where the MAC-address + VLAN was learnt.
If the address is not found, or the frame is a broadcast frame it will be sent to all the other
member ports of the VLAN.

4.3 System Information

The switch system information is provided here.
The display is similar in all falcon series

System Information Configuration

Web GUI: Configuration > System > Information
Figure 4-2: System Information Configuration
Table 4-1: System Information Configuration Parameters
System Contact
System Name
System Location

IP Configuration

Configure IP basic settings, control IP interfaces and IP routes. The maximum number of interfaces
supported is 32 and the maximum number of routes is 32.
19
The textual identification of the contact person for this managed
node, together with information on how to contact this person. The
allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 32 to 126.
An administratively assigned name for this managed node. By
convention, this is the node's fully qualified domain name. A domain
name is a text string drawn from the alphabet (A-Za-z), digits (0-9),
minus sign (-). No space characters are permitted as part of a name.
The first character must be an alpha character. And the first or last
character must not be a minus sign. The allowed string length is 0 to
255.
The physical location of this node (e.g., telephone closet, 3rd floor).
The allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 32 to 126.