Gnss Receiver; Gnss Antenna Cable Configuration; Gnss Status And Alarms - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide

4.11 GNSS Receiver

This section shows the various GNSS displays and their functionality receiver GNSS Configuration.
This section displays the configuration and status info of the GNSS receiver.

GNSS Antenna Cable Configuration

Web GUI: Configuration > Timing > GNSS
Figure 4-105: GNSS Configuration
Table 4-99: GNSS Antenna Cable Configuration parameters
Type
Velocity Factor
Length
Calculated Delay
Manual Delay
Description
Buttons

GNSS Status and Alarms

This section displays the status and Alarms of the GNSS receiver.
158
Set the type of cable being used for the GNSS antenna. When Manual is selected,
it is possible to directly configure the cable delay.
Set the Velocity Factor (VF) of the antenna cable.
Set the length of the antenna cable in meters.
Indicates the cable delay in nsec as calculated based on VF and length.
Set the cable delay in nsec manually (applicable when Type is Manual).
Set a free text description of the cable (up to 63 characters).
Calculate Delay: Click to calculate the cable delay based on current parameters.