FibroLAN Falcon-RX/812/G/A User Manual page 51

Falcon R-Class | User Guide
4.6.1.3 VLAN Port Status for Combined users
This section provides VLAN Port Status.
VLAN USER
Various internal software modules may use VLAN services to configure VLAN port configuration on
the fly.
The drop-down list on the right allows for selecting between showing VLAN memberships as
configured by an administrator (Admin) or as configured by one of these internal software modules.
The "Combined" entry will show a combination of the administrator and internal software modules
configuration, and basically reflects what is configured in hardware. If a given software modules
hasn't overridden any of the port settings, the text "No data exists for the selected user" is shown in
the table.
Web GUI: Monitor > VLANs > Ports
Figure 4-28: VLAN Port Status for Combined Users
Table 4-25: VLAN Port Status for Combined Users Parameters
Port The logical port for the settings contained in the same row.
Port Type Shows the port type (Unaware, C-Port
user wants to configure on the port. The field is empty if not overridden
by the selected user.
Ingress Filtering Shows whether a given user wants ingress filtering enabled or not. The
field is empty if not overridden by the selected user.
Frame Type Shows the acceptable frame types (All, Tagged, Untagged) that a given
user wants to configure on the port. The field is empty if not overridden
by the selected user.
Port VLAN ID Shows the Port VLAN ID (PVID) that a given user wants the port to have.
The field is empty if not overridden by the selected user.
Tx Tag Shows the Tx Tag requirements (Tag All, Tag PVID, Tag UVID, Untag All,
Untag PVID, Untag UVID) that a given user has on a port. The field is
empty if not overridden by the selected user.
51
) that a given
, S-Port, S-Custom-Port.