FibroLAN Falcon-RX/812/G/A User Manual page 241

Falcon R-Class | User Guide
Web GUI: Monitor > Link OAM > Event Status
Figure 4-173: Detailed Link OAM Link Status Events for selected port
Table 4-165: Link OAM Link Status Events for selected port Parameters
Port
Sequence Number
Frame Error Event
Timestamp
Frame error event window
Frame error event
threshold
Frame errors
Total frame errors
241
The switch port number.
This two-octet field indicates the total number of events
occurred at the remote end.
This two-octet field indicates the time reference when the event
was generated, in terms of 100 ms intervals.
This two-octet field indicates the duration of the period in terms
of 100 ms intervals. 1) The default value is one second. 2) The
lower bound is one second. 3) The upper bound is one minute.
This four-octet field indicates the number of detected errored
frames in the period is required to be equal to or greater than in
order for the event to be generated. 1) The default value is one
frame error. 2) The lower bound is zero frame errors. 3) The
upper bound is unspecified.
This four-octet field indicates the number of detected errored
frames in the period.
This eight-octet field indicates the sum of errored frames that
have been detected since the OAM sublayer was reset.