FibroLAN Falcon-RX/812/G/A User Manual page 296

Falcon R-Class | User Guide
Table 6-1 Ping (IPv4)
Hostname or The address of the destination host, either as a symbolic hostname or an IP
IP Address Address.
Payload Size Determines the size of the ICMP data payload in bytes (excluding the size of
Ethernet, IP and ICMP headers). The default value is 56 bytes. The valid range is
2-1452 bytes.
Payload Data Determines the pattern used in the ICMP data payload. The default value is 0.
Pattern The valid range is 0-255.
Packet Count Determines the number of PING requests sent. The default value is 5. The valid
range is 1-60.
TTL Value Determines the Time-To-Live /TTL) field value in the IPv4 header. The default
value is 64. The valid range is 1-255.
VID for This field can be used to force the test to use a specific local VLAN interface as
Source the source interface. Leave this field empty for automatic selection based on
Interface routing configuration.
Note: You may only specify either the VID or the IP Address for the source
interface.
Source Port This field can be used to force the test to use a specific local interface with the
Number specified port number as the source interface. The specified port must be
configured with a suitable IP address. Leave this field empty for automatic
selection based on routing configuration.
Note: You may only specify either the Source Port Number or the IP Address for
the source interface.
Address for This field can be used to force the test to use a specific local interface with the
Source specified IP address as the source interface. The specified IP address must be
Interface configured on a local interface. Leave this field empty for automatic selection
based on routing configuration.
Note: You may only specify either the VID or the IP Address for the source
interface.
296