Rmon Alarm Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Buckets Granted

RMON Alarm Configuration

This section provides configuration of RMON Alarm table. The entry index key is ID.
Web GUI: Configuration > RMON > Alarm
Figure 4-176: RMON Alarm Configuration
Table 4-168: RMON Alarm Configuration Parameters
Delete Check to delete the entry. It will be deleted during the next save.
ID Indicates the index of the entry. The range is from 1 to 65535.
Interval Indicates the interval in seconds for sampling and comparing the rising and falling
threshold. The range is from 1 to 2^31-1.
Variable Indicates the variable to be sampled, the possible variables are:
•
•
•
•
•
•
•
•
•
•
•
•
Sample Type The method of sampling the selected variable and calculating the value to be
compared against the thresholds, possible sample types are:
Absolute: Get the sample directly.
Delta: Calculate the difference between samples (default).
245
The number of data that shall be saved in the RMON.
InOctets: The total number of octets received on the interface, including
framing characters.
InUcastPkts: The number of uni-cast packets delivered to a higher-layer
protocol.
InNUcastPkts: The number of broad-cast and multi-cast packets delivered to
a higher-layer protocol.
InDiscards: The number of inbound packets that are discarded even the
packets are normal.
InErrors: The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
InUnknownProtos: the number of the inbound packets that were discarded
because of the unknown or un-support protocol.
OutOctets: The number of octets transmitted out of the interface, including
framing characters.
OutUcastPkts: The number of uni-cast packets that request to transmit.
OutNUcastPkts: The number of broad-cast and multi-cast packets that
request to transmit.
OutDiscards: The number of outbound packets that are a discarded event the
packets is normal.
OutErrors: The number of outbound packets that could not be transmitted
because of errors.
OutQLen: The length of the output packet queue (in packets).