Cpu Load; Ip Status - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 5-3: Power Supply Status Parameters
Power Supply Status
Source
Power
Fan

CPU Load

This page displays the CPU load, using an SVG graph.
The load is measured as averaged over the last 100ms, 1sec and 10 seconds intervals. The last 120
samples are graphed, and the last numbers are displayed as text as well.
To display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki for more
information on browser support. Specifically, at the time of writing, Microsoft Internet Explorer will
need to have a plug-in installed to support SVG.
Web GUI: Monitor > System > CPU Load
Figure 5-4: CPU Load

IP Status

This section displays the status of the IP protocol layer. The status is defined by the IP interfaces, the
IP routes and the neighbor cache (ARP cache) status.
259
Indicate which power supply is installed/not installed.
Indicate if PS is up or disable.
Indicate the status of the Fan (if any).