Ping Ipv6 - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Quiet (only Checking this option will not print the result of each ping request but will only
print result) show the final result.
After you press , ICMP packets are transmitted, and the sequence number and
round trip time are displayed upon reception of a reply.
The amount of data received inside of an IP packet of type ICMP ECHO_REPLY
will always be 8 bytes more than the requested payload data size (the difference
is the ICMP header).
The page refreshes automatically until responses to all packets are received, or
until a timeout occurs.
The output from the command will look like the following:
PING 172.16.1.1 (172.16.1.1) from 172.16.1.10: 56 data bytes
64 bytes from 172.16.1.1: seq=0 ttl=64 time=2.034 ms
64 bytes from 172.16.1.1: seq=1 ttl=64 time=1.729 ms
64 bytes from 172.16.1.1: seq=2 ttl=64 time=1.954 ms
64 bytes from 172.16.1.1: seq=3 ttl=64 time=1.699 ms
64 bytes from 172.16.1.1: seq=4 ttl=64 time=1.916 ms
--- 172.16.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.699/1.866/2.034 ms

Ping IPv6

R Class series allow you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity issues.
After you press Start, ICMPv6 packets are transmitted, and the sequence number and roundtrip time
are displayed upon reception of a reply. The page refreshes automatically until responses to all
packets are received, or until a timeout occurs
Web GUI: Diagnostics > Ping (IPv6)
Figure 6-2: ICMPv6 PING Configuration
PING6 server ff02::2, 56 bytes of data.
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=0, time=10ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=0, time=10ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=1, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=1, time=0ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=2, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=2, time=0ms
297